Applications | These cables are designed for use in open cast miningfactories for laying of excavators and conveyor beltswith permanent movements between parts of thee quipment.These cables are used where the ascending pipe servesas earth conductor, for instance for submersible pumps. |
Standards | VDE 0250 Part 812 |
Construction | |
Conductors | Flexible stranded copper conductor, class 5 according to DIN VDE 0295/IEC 60228. |
Insulation | EPR. |
Earth Conductor (for –J type) | Incorporatedas a fourth core or split into three in theouter interstices. |
InnerSheath | EPR. |
Outer Sheath | CM type 5GM5. |
Dimensions and Weight
(N)SHOEU-J
Number of Cores×Nominal Cross Section | Insulation Thickness | Thickness of Inner Sheath | Thickness of Outer Sheath | Minimum Overall Diameter | Maximum Overall Diameter | Nominal Weight |
No.×mm² | mm | mm | mm | mm | mm | kg/km |
3×1.0 | 0.60 | 0.8 | 1.2 | 9.2 | 9.6 | 160 |
3×1.5 | 0.60 | 0.8 | 1.2 | 10.4 | 12.0 | 180 |
3×2.5 | 0.70 | 0.8 | 1.2 | 11.3 | 12.9 | 240 |
3×4 | 0.80 | 0.9 | 1.3 | 12.5 | 14.1 | 295 |
3×6 | 0.80 | 1.0 | 1.4 | 13.9 | 15.5 | 370 |
3×10 | 1.00 | 1.0 | 1.4 | 16.8 | 18.8 | 570 |
3x50+3x25/3 | 1.10 | 1.4 | 2.5 | 31.5 | 34.5 | 2500 |
3x70+3x35/3 | 1.10 | 1.4 | 2.5 | 36.2 | 39.2 | 3400 |
3x95+3x50/3 | 1.20 | 1.7 | 2.8 | 42.0 | 45.0 | 4475 |
3x120+3x70/3 | 1.20 | 2.0 | 3.0 | 46.0 | 49.0 | 5400 |
4×1.5 | 0.60 | 0.8 | 1.2 | 10.7 | 13.0 | 210 |
4×2.5 | 0.70 | 0.9 | 1.4 | 11.7 | 13.7 | 260 |
4×4 | 0.80 | 0.9 | 1.4 | 13.7 | 15.7 | 350 |
4×6 | 0.80 | 1.0 | 1.4 | 15.2 | 17.2 | 485 |
4×10 | 1.00 | 1.0 | 1.6 | 19.0 | 21.0 | 690 |
4×16 | 1.00 | 1.2 | 1.8 | 22.0 | 24.0 | 1090 |
4×25 | 1.00 | 1.3 | 2.2 | 26.5 | 29.5 | 1600 |
4×35 | 1.00 | 1.3 | 2.3 | 30.0 | 33.0 | 2090 |
4×50 | 1.10 | 1.5 | 2.6 | 34.5 | 38.5 | 2700 |
4×70 | 1.10 | 1.5 | 2.6 | 39.5 | 43.5 | 3620 |
4×95 | 1.20 | 1.7 | 2.8 | 45.0 | 49.0 | 4710 |
4×120 | 1.20 | 2.0 | 3.3 | 51.0 | 55.0 | 6020 |
(N)SHOEU-O
Number of Cores×Nominal Cross Section | Insulation Thickness | Thickness of Inner Sheath | Thickness of Outer Sheath | Minimum Overall Diameter | Maximum Overall Diameter | Nominal Weight |
No.×mm² | mm | mm | mm | mm | mm | kg/km |
5×1.5 | 0.60 | 0.8 | 1.2 | 12.0 | 14.0 | 240 |
5×2.5 | 0.70 | 0.9 | 1.3 | 13.0 | 14.8 | 305 |
5×4 | 0.80 | 0.9 | 1.4 | 14.8 | 17.0 | 440 |
5×6 | 0.80 | 1.0 | 1.6 | 17.0 | 19.0 | 580 |
5×10 | 1.00 | 1.0 | 1.6 | 20.0 | 23.0 | 870 |
5×16 | 1.00 | 1.2 | 1.8 | 23.8 | 26.8 | 1280 |
5×25 | 1.00 | 1.3 | 2.3 | 29.5 | 32.5 | 1950 |
2×1.5 | 0.60 | 0.8 | 1.2 | 9.8 | 11.8 | 155 |
7×1.5 | 0.60 | 0.9 | 1.4 | 13.0 | 14.6 | 295 |
8×1.5 | 0.60 | 0.9 | 1.4 | 14.0 | 15.6 | 320 |
10×1.5 | 0.60 | 1.0 | 1.6 | 15.5 | 17.5 | 390 |
12×1.5 | 0.60 | 1.0 | 1.6 | 16.5 | 18.5 | 445 |
2×2.5 | 0.70 | 0.8 | 1.2 | 10.8 | 12.8 | 195 |
4×2.5 | 0.70 | 0.9 | 1.4 | 11.7 | 13.7 | 290 |
7×2.5 | 0.70 | 0.9 | 1.4 | 15.0 | 17.0 | 410 |
8×2.5 | 0.70 | 0.9 | 1.4 | 16.0 | 19.0 | 430 |
10×2.5 | 0.70 | 1.0 | 1.6 | 18.0 | 20.5 | 520 |
12×2.5 | 0.70 | 1.0 | 1.6 | 18.5 | 21.5 | 580 |
18×2.5 | 0.70 | 1.0 | 1.6 | 21.5 | 24.5 | 835 |
24×2.5 | 0.70 | 1.2 | 1.8 | 25.5 | 28.5 | 895 |
2×4 | 0.80 | 0.9 | 1.2 | 12.0 | 13.6 | 250 |
12×4 | 0.80 | 1.2 | 1.8 | 25.0 | 28.0 | 990 |
1×16 | 1.00 | - | 1.4 | 9.6 | 11.2 | 215 |
1×25 | 1.00 | - | 1.7 | 11.2 | 13.2 | 325 |
1×35 | 1.00 | - | 1.8 | 12.6 | 14.6 | 430 |
1×50 | 1.10 | - | 2.0 | 14.6 | 16.6 | 610 |
1×70 | 1.10 | - | 2.2 | 16.6 | 18.6 | 825 |
1×95 | 1.20 | - | 2.3 | 18.9 | 20.9 | 1070 |
1×120 | 1.20 | - | 2.4 | 20.8 | 22.8 | 1300 |
1×150 | 1.30 | - | 2.5 | 23.0 | 25.0 | 1610 |
1×185 | 1.40 | - | 2.6 | 24.9 | 27.9 | 2000 |
1×240 | 1.50 | - | 2.8 | 28.2 | 31.2 | 2500 |
1×300 | 1.80 | - | 3.3 | 31.8 | 34.8 | 3200 |
3×2.5 | 0.70 | 0.8 | 1.2 | 11.3 | 12.9 | 240 |
3×4 | 0.80 | 0.9 | 1.3 | 12.5 | 14.1 | 295 |
3×6 | 0.80 | 1.0 | 1.4 | 13.9 | 15.5 | 370 |
3×10 | 1.00 | 1.0 | 1.4 | 16.8 | 18.8 | 570 |
3×16 | 1.00 | 1.0 | 1.6 | 19.0 | 22.0 | 770 |
3×25 | 1.00 | 1.2 | 2.0 | 23.5 | 26.5 | 1200 |
3×35 | 1.10 | 1.3 | 2.2 | 27.5 | 30.5 | 1570 |
3×50 | 1.10 | 1.5 | 2.6 | 31.5 | 35.5 | 2200 |
3×70 | 1.10 | 1.5 | 2.6 | 36.0 | 40.0 | 2910 |
3×95 | 1.20 | 1.7 | 2.8 | 41.0 | 45.0 | 3780 |
3×120 | 1.20 | 1.8 | 3.0 | 45.0 | 49.0 | 4700 |
3×150 | 1.30 | 1.7 | 2.8 | 49.0 | 53.0 | 5650 |
3×185 | 1.40 | 2.2 | 3.4 | 55.0 | 59.0 | 7050 |